Home Blog Comments Download Newsletter Video's
A TYPICAL ON-SITE MONITORING EXAMPLE

water treatment system and air system on site monitoring

The typical on-site monitoring checks recommended for good operating practice should be carried out at frequencies detailed in the chart below.

water treatment system and air system on site monitoring



Parameter
Timing

water treatment system and air system on site monitoring

Make-Up Water

water treatment system and air system on site monitoring

Cooling Water
Calcium hardness as mg/l CaCO3
Monthly
Monthly

water treatment system and air system on site monitoring

Magnesium hardness as mg/l CaCO3
Monthly
Monthly
Total hardness as mg/l CaCO3
Monthly
Monthly

water treatment system and air system on site monitoring

Total alkalinity as mg/l CaCO3
Quarterly
Quarterly
Chlorides as mg/l CaCO3
Monthly
Monthly

water treatment system and air system on site monitoring

Sulphate as mg/l CaCO3
Quarterly
Quarterly
Conductivity μs (Total Dissolved Solids)
Monthly
Weekly
Suspended solids mg/l
Quarterly
Quarterly

water treatment system and air system on site monitoring

Inhibitor(s) level mg/l
Monthly
Oxidising biocide mg/l
Monthly

water treatment system and air system on site monitoring

Tempratuture °C
Quarterly
pH
Quarterly
Weekly

water treatment system and air system on site monitoring

Solubale iron as mg/l Fe
Quarterly
Quarterly
Total iron as mg/l Fe
Quarterly
Quarterly

water treatment system and air system on site monitoring

Concentration factor
Monthly
Microbiological activity
Quarterly
Weekly

water treatment system and air system on site monitoring

Legionella
Quarterly

The identification of changes in the water chemistry allows any necessary corrective actions to be taken to the treatment programme or system operating conditions.

water treatment system and air system on site monitoring

Please dont hesitate to contact our office regarding any of the above
Tel: 01252 837778 or Email: info@aquavent.eu